Corrugating Roller

Enermof is workiing with China's leading corrugating roller manfuacturers as sales partners for overseas market.

​

Our core value is ‘Choose Quality, Create Value’. Meanwhile, our price is factory price also for worldwide customers.

​

We are supplying to the machine users:

BHS FOSBER MINGWEI HSIEH HSU WANLIAN KAITUO JINGSHAN FULI

TCY LMC LIAN TIEE JHF SUNRISE CHYAN. JYE

Dongfang Dinglong Jinchang Topack Keshenglong Taiyi

​

1. The coating is firmly combined with the substrate to ensure that the coating will not fall off after long-term use;

2. The coating hardness is high, the wear resistance is increased, and the life is linearly extended;

3. The coating thickness is uniform and controllable, that is, the accuracy can be guaranteed;

4. After coating treatment, through a special polishing process, the surface roughness can reach Ra0.4-0.6, which can meet the needs of high-speed machine production;

5. Cooperate with UV-type and UVV-type corrugated design, which can effectively improve the hardness of the cardboard, reduce the amount of glue used and the waste of core paper;

6. The flute type will never wear out during use, and the paper consumption rate can be guaranteed for a long time;

7. After the corrugating machine is used on the machine, the cardboard

produced is maintained at a certain thickness, the printing is always smooth, and the quality of the cardboard and carton is controlled stably;

8. The coating is removed by a special method, and the wheel body can be reused;

9. The service life is improved, and the number of replacements is reduced, which also saves labour and material expenditures;

​

Specifications of corrugating roller:

1. Roller diameter: 100-600mm

2. Roller face length: 1000-4000mm

3. Paper guide: Vacuum negative pressure external suction type, vacuum negative pressure internal suction type or air cushion positive pressure type

4. Heating and drainage forms: traditional siphon type, sink siphon type and peripheral heating type

​

Precision Index of corrugating roller:

1. Flute height limit deviation≤0.02mm

2. Flute thickness limit deviation≤0.015mm

3. Flute profile limit deviation±0.02mm

4. Addendum circle run-out tolerance≤0.025mm

5. Limit deviation of flute flank to axis equality≤0.02mm

6. Finish Ra ≤0.4 μm

7. Flute division limit deviation±20″

8. The limit deviation of the crown of the crown roller is 5% of the crown value

9. Special 50CrMo alloy steel forgings for corrugated rollers

10. Intermediate frequency quenching hardness of the basic body of the corrugated roller>HRC59

11. Wear-resistant tungsten carbide coating thickness 0.06-0.08mm

12. Microhardness of tungsten carbide coating>HV1250-1400

13. Bonding strength>75Mpa

14. Visible metallographic porosity <1%

15. Optimized economical design

16. Fine grinding and polishing of tooth surface, roughness Ra ≤1.6 μm